CWIVE
Would you like to react to this message? Create an account in a few clicks or log in to continue.

火柴 Tips

4 posters

向下

火柴 Tips Empty 回復: 火柴 Tips

發表  w@n 周一 五月 05, 2008 9:49 pm

ada 寫到:
w@n 寫到:
火柴人 寫到:Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) IOS version
2) IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142

Please supply model answer.

師兄無睇書啦,,火火咪比左answer law..罰你睇多幾次forum, 留多幾次言a!!!!

係我錯, 我一於睇晒佢
w@n
w@n

文章數 : 30
注冊日期 : 2008-03-29
來自 : 無邊的天空 ~ class b

回頂端 向下

火柴 Tips Empty 回復: 火柴 Tips

發表  ada 周一 五月 05, 2008 9:03 pm

w@n 寫到:
火柴人 寫到:Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) IOS version
2) IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142

Please supply model answer.

師兄無睇書啦,,火火咪比左answer law..罰你睇多幾次forum, 留多幾次言a!!!!
ada
ada

文章數 : 135
注冊日期 : 2008-03-28
來自 : CLASS A

回頂端 向下

火柴 Tips Empty 回復: 火柴 Tips

發表  w@n 周一 五月 05, 2008 7:27 pm

火柴人 寫到:Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) IOS version
2) IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142

Please supply model answer.
w@n
w@n

文章數 : 30
注冊日期 : 2008-03-29
來自 : 無邊的天空 ~ class b

回頂端 向下

火柴 Tips Empty 回復: 火柴 Tips

發表  自由人Paul 周一 五月 05, 2008 12:15 pm

死期就到~~都係唔盟!

睇多2次~~ Crying or Very sad Crying or Very sad Crying or Very sad

自由人Paul

文章數 : 12
注冊日期 : 2008-03-28

回頂端 向下

火柴 Tips Empty 回復: 火柴 Tips

發表  火柴人 周六 五月 03, 2008 1:54 am

ada 寫到:
火柴人 寫到:Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) What is the IOS version
2) What is the IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142

多謝火火,,雖然我睇唔明.......

睇唔明? Cisco very like test the show version 架窩.
火柴人
火柴人

文章數 : 56
注冊日期 : 2008-03-28
來自 : Class B

回頂端 向下

火柴 Tips Empty 回復: 火柴 Tips

發表  ada 周六 五月 03, 2008 1:48 am

火柴人 寫到:Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) IOS version
2) IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142

多謝火火,,雖然我睇唔明.......
ada
ada

文章數 : 135
注冊日期 : 2008-03-28
來自 : CLASS A

回頂端 向下

火柴 Tips Empty 火柴 Tips

發表  火柴人 周六 五月 03, 2008 1:47 am

Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IN-L), Version 11.1(16), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 15-Dec-97 18:03 by phester
Image text-base: 0x03023C98, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Router_Name uptime is 1 day, 9 hours, 14 minutes
System restarted by power-on at 15:20:42 HKT Thu May 1 2008
System image file is "flash:c2500-in-l.111-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.
Processor board ID 06097307, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

1) IOS version
2) IOS image name
3) what & where boot from
4) which model of router
5) which model of CPU
6) How much RAM / NVRAM / flash memory
7) How to change the configuration register?
Cool What happen will have, if the Configuration register is 0x2142
火柴人
火柴人

文章數 : 56
注冊日期 : 2008-03-28
來自 : Class B

回頂端 向下

回頂端


 
這個論壇的權限:
無法 在這個版面回復文章